Sandpiper S1F Non-Metallic Bedienungsanleitung PDF herunterladen (Seite 11)

s1fnmdl3sm-rev0614

3: EXP VIEW

sandpi p erpump .com

Model S1F Non-Metallic • 8

Troubleshooting Guide Composite Repair Parts Drawing

Service & Repair Kits

476-217-000 Air End Kit (For Polypropylene Center Section)

Seals, O-Rings, Gaskets, Retaining Rings, Air Valve

Sleeve & Spool Set and Pilot Valve Assembly

476-218-000 Air End Kit (Stroke Indicator Option, For

Polypropylene Center Section)

Seals, O-Rings, Gaskets, Retaining Rings, Air Valve,

Sleeve & Spool Set and Pilot Valve Assembly

476-197-354 Wetted End Kit

Santoprene Diaphragms, Santoprene Balls and

PTFE Seals

476-197-360 Wetted End Kit

Nitrile Diaphragms, Nitrile Balls and PTFE Seals

476-197-363 Wetted End Kit

FKM Diaphragms, FKM Balls and PTFE Seals

476-197-365 Wetted End Kit

Neoprene Diaphragms, Neoprene Balls and

PTFE Seals

476-197-635 Wetted End Kit

Neoprene Diaphragms, PTFE Overlay Diaphragms,

PTFE Balls and PTFE Seals

Electronic Leak Detector Kits

032-037-000 110 VAC / 220 VAC

032-045-000 12 - 32 VDC

Note:

Polypropylene pumps are shipped with the 1" NPT Pipe Plug (Item 64) installed in the end ports of both suction and discharge one-piece

manifolds. To convert to the Inline porting positions for pump installation and operation, rst remove the pipe plugs and re-install in the center ports. Apply PTFE tape

or pipe sealant to threads of the plug before installation.

Torque:

140 in. lbs.

Torque:

160 in. lbs.

Torque:

140 in. lbs.

Torque:

200 in. lbs.

Torque:

200 in. lbs.

Torque:

180 in. lbs.

Torque:

320 in. lbs.

ONE-PIECE BONDED OPTION

OVERLAY OPTION

INLINE SUCTION

MANIFOLD OPTION

INLINE DISCHARGE

MANIFOLD OPTION

476-197-654 Wetted End Kit

Santoprene Diaphragms, PTFE Overlay

Diaphragms, TFE Balls and TFE Seals

476-197-659 Wetted End Kit

One-Piece Bonded Diaphragms,

PTFE Balls, PTFE Seals

476-198-655 Wetted End Kit

Santoprene Diaphragms, PTFE Overlay Diaphragms,

PTFE Pumping Diaphragms, PTFE Balls and

PTFE Seals

476-198-354 Wetted End Kit

Santoprene Diaphragms, Santoprene Pumping

Diaphragms, Santoprene Check Balls and PTFE Seals

476-198-659 Wetted End Kit

One-Piece Bonded Diaphragms, PTFE Pumping

Diaphragms, PTFE Balls, PTFE Seals

MODEL SPECIFIC

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 25 26

Kommentare zu diesen Handbüchern

Keine Kommentare

Sandpiper S1F Non-Metallic Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Pumpen Sandpiper S1F Non-Metallic